The Electric Heating Company recognise that “Time is Money” and as such have developed Electric Boiler & Cylinder Packages that incorporate all the necessary components (with the exception of radiators, radiator valves and pipe-work) for a complete Electric Heating & Hot Water system.
Electric Boilers are available up to 14.4Kw with Indirect Stainless Steel Unvented Cylinders up to 300 litres capacity.
No flue required
No fumes and no risk of explosion
100% energy efficient
Economic running costs
Silent in operation
Can provide central heating only or central heating & hot water
Can be used for under floor heating
No annual safety certificate required
24 hour controllability
No maintenance required
Multiple fail-safes fitted in unit
LED indicators show status of operation
Direct Cylinder Packages
These packages are ideal for an install where you wish to keep the domestic hot water system completely separate from the primary central heating system.
The cylinder can be installed in a location of your choice within the property and independently controlled via our E10 Supreme Saver. The cylinder is heated via two 3kw immersion heaters pre-installed into the side of the cylinder. The primary heating system is controlled via the supplied single channel time switch and room thermostat.
Indirect Cylinder Packages
The Indirect Cylinder package allows your central heating and hot water to be controlled from the same programmer.
With this package the electric boiler heats your radiators and the hot water cylinder via the cylinders internal coil. This setup results in a much faster reheat over a conventional direct cylinder. The package provides the installer with all the necessary controls to s-plan control system. The controls are supplied loose allowing the installer maximum flexibility for installation and location of the system and all of the system components.
Pre-plumbed Cylinder Packages
EHC now offer Pre-Plumbed Cylinders with their range of Comet and SlimJim Electric Boilers.
The Pre-Plumbed Stainless Steel Unvented Cylinders, which can save up to 70% on installation time, incorporate pre-wired controls, automatic by-pass, auto air vent, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2×2 port valves, filling loop and circulating pump where required.