Comet Boiler & Indirect Cylinder Packages

    Boiler outputs from 9kW to 14.4kW and Cylinder capacities from 150L to 210L

    Comet Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work.This value-for-money package includes a Comet Electric Boiler and an Indirect Stainless Steel Cylinder complete with a Twin Channel Heatpack.

    Comet Electric Boiler Packages are available with single phase Boilers from 9kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

    Our single phase Electric System Boiler outputs are 9kW, 12kW with the 14.4kW available for properties that require larger outputs.

    Read More

    Shop Comet Electric Boiler & Indirect Cylinder Packages online


    Comet Features

    • 100% efficient
    • Integral sealed system kit
    • Virtually silent in operation
    • Suitable for central heating only or central heating & hot water
    • Suitable for Underfloor Heating
    • No Mandatory Maintenance required
    • Stainless Steel Heat Exchanger
    • 5 Year Warranty (T&C’s Apply)
    • Volt-Free Control Connections
    • 6 Stage Heating
    • Integral System Diagnostics
    • Easy-Fit Connectors & Sensors
    • In-Built Fault Finding Diagnostics
    • High Current Thermal Cut-Out
    • Vortex Flow Temperature Sensor
    • Digital Pressure Gauge
    • ErP Smart Pump
    • Removable bottom tray

    What's Included - Choice of Electric Boiler & Indirect Stainless Steel Cylinder

    • Twin Channel Programmer
    • Room Thermostat
    • 2 Port Zone Valve (x2)
    • Wiring Centre
    • Dual Cylinder Thermostat
    • Temperature & Pressure Relief Valve
    • 1 x 3kW Immersion Heater
    • DHW Expansion Vessel
    • 15mm / 22mm Tundish
    • Inlet Control Set
    • Installation & Maintenance Instructions
    • Benchmark Logbook

    Indirect Cylinder Features

    • ErP C-Rated Hot Water Cylinder
    • 50mm Insulation
    • T&P Relief Valve
    • Backup 3kW Immersion Heater

    • If a property has a bath then it is likely that a hot water cylinder will be required. For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.


    EHC - The Electric Boiler Specialists

    • Installation is quicker than a gas system
    • The wiring of an Electric Boiler is the same as an Electric Shower
    • Electric Boilers can be used for Open Vented Systems
    • Can be used as back-up for Heat Pumps
    • Standard radiators and valves can be used with Electric Boilers
    • EHC Electric Boilers have a soft start to avoid power surges
    • Electric Boilers are almost silent when operating
    • Electric Boilers emit no noxious fumes or gases
    • Can be used with underfloor heating systems
    • EHC only use and recommend High Efficiency ErP Smart Pumps



    © 2022 The Electric Heating Company Ltd

    Company Number: SC289495

    VAT Number: GB870630137

    Website by Yello


    01698 820533

    Block 5, Unit 40, Third Road, Blantyre Industrial Estate, Blantyre, South Lanarkshire G72 0UP
    EHC trustpilot
    • icon-secured
    • icon-mastercard
    • icon-paypal
    • icon-visa
    • icon-maestro
    • icon-jcb
    • icon-visa-electron
    • icon-klarna