Fusion Electric Boiler Range
Fusion Standard/Slimline BoilersIdeal for retrofit and new build installations requiring heating only or heating and hot water. For hot water purposes either a direct or indirect cylinder will be required. Due to their compact size these Electric Boilers can be easily situated in airing or kitchen cupboards. All Fusion products can be installed with any type of wet system radiators and TRV’s.The standard Fusion Boiler has an expansion vessel in-built however the Slimline model, which is ideal for an Open Vented system, requires an expansion vessel (which is not supplied with the unit) if used in a Sealed System.
Fusion Comet Electric BoilerThe Comet Electric Boiler is the outcome of many hours of product development which has taken Electric Boiler Technology to a new level. This outstanding Boiler has all the hallmarks of the traditional Fusion range however with its improved appearance and size coupled with state of the art components it is without question the best value Electric Boiler on the market today. Apart from its modern sleek design the key developments within the unit include an Automatic Bypass, Digital Pressure Sensor, Integral Magnetic Filter and Stainless Steel Heat Exchanger. The Comet range includes 6, 9, 12 and 14.4kW models in single phase and a 24kW 3- Phase model.All boilers within the range are suitable for Wet Systems including Underfloor Heating.
click to read more>>
Unlike most electric boilers, Fusion boilers are designed to eliminate unnecessary external plumbing and pipe work. They are the ideal choice for wet central heating and are also suited to underfloor heating systems.
The Fusion Standard boiler has been engineered to include the pump, auto-air vent, expansion vessel and pressure gauge within the compact casing.
With the exception of the expansion vessel, the Slimline version boasts all the advantages of the Standard model. This allows both boiler types to be discreetly located in either a cupboard or wall mounted e.g. in the kitchen area.
To ensure maximum efficiency all Fusion boilers incorporate six stage heating using a single copper heat exchanger. With this unique facility the boiler will modulate so that both electricity consumption and running costs are controlled through all heating cycles.
The easy-to-use control panel allows both the installer and home owner to identify the operating temperatures on the flow and return, system flow rate and kW output of the boiler at any given time.
The control panel also enables the installer to utilise the inbuilt self diagnostic feature during installation or routine maintenance. The operating temperature of the boiler can be adjusted using the control panel and range from 40 degrees through to a maximum 85 degrees.
Our single phase boiler outputs are 6kW, 9kW and I2kW. The I4.4kW is available for properties that require a higher output. For multiple boiler installations it is also possible to install the boiler in series to suit non domestic situations. In light commercial properties with a 3-Phase electricity supply, we supply 24kW and 36kW output boilers within the Fusion Standard range.
The complete Fusion range is BEAB Approved guaranteeing you complete piece of mind for the lifetime of your product.
< Back to Products