Fusion Comet Electric Boiler

Please use the links below to browse to your required page.

Unlike most electric boilers, all EHC boilers are designed to eliminate unnecessary external plumbing and pipe work.

The Comet boiler has been engineered to include the pump, auto-air vent, automatic bypass and expansion vessel within the compact casing. A magnetic filter is also pre-plumbed within the unit for added protection which will enhance the life of the boiler.

With the sleek design and integral pipework the boiler can be discreetly located in either a cupboard or wall mounted e.g. in the kitchen area.

To ensure maximum efficiency, all Comet boilers incorporate six stage heating using a single stainless steel heat exchanger. With this unique facility the boiler will modulate so that both electricity consumption and running costs are controlled through all heating cycles.

The easy-to-use control panel allows both the installer and home owner to identify the operating temperatures on the flow and return, system flow rate and kW output of the boiler at any given time. The digital pressure sensor within the unit allows you to take an accurate reading of the system pressure at all times.

The control panel also enables the installer to utilise the inbuilt self diagnostic feature during installation or routine maintenance.

The operating temperature of the boiler can be adjusted using the control panel and range from 40 degrees through to a maximum 85 degrees.

Our single phase boiler outputs are 6kW, 9kW and I2kW. The I4.4kW is available for properties that require a higher output.

For multiple boiler installations it is also possible to install the boiler in series to suit non domestic situations.

In light commercial properties with a 3-Phase electricity supply, we supply a 24kW output boiler within the Comet range.

Due to the proven reliability of our products we have no hesitation in offering a 2 year warranty for both Parts and Labour.

< Back to Fusion Electric Boiler Range