Electric Combination Boilers
Fusion E10 Combination Unit
Please use the links below to browse to your required page on electric combination boilers.
The Fusion E10 Electric Combination Unit offers the comfort and convenience of wet central heating and domestic hot water for all domestic properties with no access to mains gas
The Fusion E10 Combination Unit is a fully packaged unit which is housed in an elegant enclosure and comes complete with the Fusion Slimline Electric Boiler, Indirect stainless steel Hot Water cylinder and is pre-plumbed using the ‘S’ Plan configuration. We have also incorporated the Expansion vessels required for both the Heating and Domestic Hot Water within the unit. The unit is also supplied complete with Tundishes and Control Valves.
The unit is pre-wired with a fully programmable controller to provide full control of both the central heating and domestic hot water.
The ‘S’ Plan configuration enables you to select Heating only, Hot Water only or both at the same time. As the boiler is also heating the Indirect cylinder, the re-heat times for the Hot water is superior to that of a Direct cylinder comprising of an Immersion heater only.
The Fusion E10 Combination Unit is compact in size and has been designed to fit into a standard domestic airing cupboard making it ideal for a range of properties. They are especially suited to flats and apartments where space is at a premium as there are no flue requirements.
- Controllable, efficient wet central heating
- Twin Channel Programmer to suit the Off-peak times offered by the Economy 10 tariff.
- Uses standard radiators and thermostatic radiator valves
- Designed as a sealed system
- Domestic hot water from Un-vented Indirect hot water cylinder
- Cylinder manufactured from Duplex 2304 stainless steel
- No flue and no fuel tanks required
- Silent in operation
- Front panel indication to show boiler status
- Soft start approach to avoid power surges
- Integral Magnetic filter for boiler protection
- Adjustable controls to determine boiler temperature outputs
- Minimal service and maintenance costs
- No requirement for annual gas safety certificate
- On-site parts and labour guarantee
- - 10 years on the cylinder
- - 2 years on boiler and other controls
The Fusion Slimline Electric Boiler is the perfect solution for properties with no access to mains gas supply and homes which have gas boiler restrictions e.g. listed buildings and bed-sit sleeping areas. Not only is the boiler the ideal choice for wet central heating but it’s also suited to Underfloor heating.
The Fusion is one of the most complete electric boilers in the market today. Unlike most Electric boilers, the Fusion was designed to eliminate unnecessary external plumbing and pipe work. The boiler has also been engineered to include the Pump, Auto-air vent and Pressure Gauge within the compact casing.
To ensure maximum efficiency, the boiler boasts 6 stage heating using a single copper heat exchanger. With this unique facility both electricity consumption and running costs are controlled through all heating cycles. The operating temperatures of the boiler can be adjusted using the control panel – the temperature outputs range from 40 degrees through to a maximum of 85
The easy to use control panel allows both the installer and home owner to identify the operating temperature, flow rate and kW output of the boiler at any given time. The control panel also has an important part to play in fault diagnosis by displaying fault codes which minimise unnecessary down time.
The boiler outputs applicable to the Fusion E10 Combination Unit are 9kW, 12kW and 14.4kW.
Domestic Hot Water
The Stainless Steel unvented cylinder within the Combination Unit will provide the whole house with mains pressure hot water suited to the Economy 10 tariff. It ensures powerful showering and superb hot water flow rates without the need for expensive pumps and inefficient cylinders and header tanks. Due to the boiler heating the Indirect Hot Water Cylinder the re-heat times for the hot water is superior to that of a Direct Cylinder. The Performance Table within the brochure details re-heat times for the various Fusion E10 Unit arrangements.
As the hot water is at mains pressure, the Fusion E10 Combination Unit can be installed on any floor level within the home.
< Back to Fusion Electric Boiler Range